Updating Plumbing Fixtures

plumber with tools under a sink

What Are Considered Plumbing Fixtures?

Standard plumbing fixtures can include toilets, sinks, showers, bathtubs, and faucets. With plumbing fixtures, there should be a shut-off or stop valve that’s installed in each of the water supply lines which leads to a specific fixture.

What is the Difference Between Plumbing Fixtures and Fittings?

Plumbing fixtures as mentioned before are items such as sinks, faucets, toilets, showers, etc that are used to interact with the plumbing system in the property. Plumbing fittings are the parts that connect these fixtures to one another and to the main water supply lines. Basically, plumbing facilitates the movement of water throughout the system while plumbing fixtures are the parts where the water flows out to the occupant or user.

Is a Water Closet a Plumbing Fixture?

A water closet is a plumbing fixture that is used for flushing human waste. There is a water-containing receptor such as a bowl or cistern that collects solid body waste and liquid. This is connected to a water supply and flush mechanism. It will move the waste through an exposed integral trap seal into a gravity drainage system. Water closets can be found in homes, public restrooms, and businesses.

Upgrading a Plumbing Fixture

There can be multiple reasons to upgrade a plumbing fixture. It could be that your old one is starting to show signs of wear and age and it’s time for a replacement. Or it can be simply that you wish for a change in look or features. As such, changing fixtures can be easy to do. Here are a few steps or tips that can help:

  • Turn off the water supply: This first step should be done before you begin anything else. Make sure that the water supply connected to the fixture is turned off. Without doing so you can risk a flood of water unnecessarily coming out.
  • Disconnect the old fixture: After turning off the water disconnect the old fixture. Remove any bolts and screws and then disconnect any pipes or hoses connected to the fixture.
  • Install the new fixture: Connect the new fixture to the pipes and hoses it needs. Then secure it further with bolts and screws.
  • Turn on the water: Once everything has been properly fitted and tightened you can turn the water back on to test it out. Make sure you don’t have any leaks around any openings and make the necessary adjustments to make sure the job is done. If you just leave leaks as is you risk wearing down parts such as washers prematurely.

Changing your plumbing fixtures is relatively simple to do with a few steps. If parts are more complex reach out to a professional plumber.

fixtures

What are the Five 5 Plumbing Accessories?

The main five plumbing accessories are considered to be drains, faucets, pipes, fittings, and toilets. Pipes and fittings will connect everything together to the fixture. Faucets will control the water flow and the drains will remove the wastewater. Toilets in turn will flush waste away.

Plumbing Fixture Ideas

Pipe Insulation

If you notice that your pipes repetitively freeze in the winter or sweat in the summer consider pipe insulation. It’s a relatively inexpensive way to keep pipes at a comfortable temperature, and it can also help reduce noise.

Tankless Water Heater

Tankless water heaters are more compact and energy-efficient units or ver standard tank heaters. They only heat water when you need it so you don’t have to worry about hot water being on standby. You can install them anywhere and they are beneficial in that they will be able to lower the costs of energy bills.

Low-Flow Toilets and Faucets

If you’re looking for a way to save on water use consider low-flow toilets and faucets. They are a better option for the environment and since they use less water you’re doing your part to conserve resources. You’ll also get the perk of saving money on your water bills.

Solar Water Heater

Solar water heaters are a great way to lower your carbon footprint as they use the sun’s energy to heat water. This means no use of fossil fuels and more energy efficiency of use. Lower energy bills today.

Gray Water System

A gray water system is used to recycle household wastewater to irrigate landscaping. It’s a great way to conserve water while reducing the strain on municipal water systems. This can be very helpful to the environment while helping you to lower bills.

Rainwater Collection

Another way to reduce water bills is with rainwater collection. These systems collect rainwater from your roof and use it to irrigate your landscaping. Conserve water and reduce your environmental impact.

Green Roofs

A good way to improve your property’s energy efficiency is by installing a green roof. A green roof is a roof covered with vegetation. You’ll be able to contribute to the environment and reduce your carbon footprint. They will be able to insulate your home and keep it cool in the summer and warm in the winter while reducing stormwater runoff.

Solar Power

A solar-powered roof will use the sun’s energy to generate electricity. They will reduce reliance on fossil fuels and won’t produce greenhouse gases. They are more energy efficient which will allow you to save money on your energy bills as well.

Wind Power

Another thing to consider is wind power. They will use the wind to generate electricity and will also present greenhouse gasses and lower your carbon footprint. An energy-efficient option that will save on energy bills.

Geothermal Heating and Cooling

Geothermal heating uses the earth’s heat to cool and heat your home from tunnels of piping installed underneath the home. They are very energy efficient and don’t produce greenhouse gases.

Consider these options when you’re looking to update your plumbing fixtures to a more energy-efficient and environmentally friendly course.

Learn more about how you can improve your plumbing by getting in touch with the team at Sanz Plumbing LLC. We provide secure updates with your plumbing fixtures in Fort Washington, MD. Call 202-793-4722 to get started.